Product Data Sheet  TPO COATED METAL

 

 

 

TPO_Roofing

 

 

TPO Coated Metal is a 24-gauge galvanized steel sheet that is coated with a layer of 0.035” non-reinforced TPO flashing.

 

BASIC USES

TPO Coated Metal is cut into the appropriate width and used to fabricate metal drip edges or other roof perimeter edging profiles. TPO membrane may be welded directly to the coated metal edging, eliminating the need to strip in the metal with a separate piece of membrane.

TYPICAL PHYSICAL PROPERTIES

 

BENEFITS & SUPPLEMENTAL STATEMENTS

•    Allows direct welding of TPO membrane to metal •    Easy to cut and form for creating a variety of edge sizes and shapes

 

INSTALLATION INSTRUCTIONS

1.    Install TPO coated metal with 1⁄8” to 1⁄4” (3 to 6 mm) wide joints between adjoining sections. 2.    Install 2” wide (5 cm) duct tape over joints in TPO metal (to act as a bond breaker). 3.    Heat-weld 6” wide (15.5 cm) strip of TPO non-reinforced flashing membrane over joint. 4.    Position TPO reinforced membrane and heat-weld to TPO clad metal achieving a min 1 1⁄2” wide weld.

Review Mule-Hide specifications and details for complete installation information.

 

STORAGE & HANDLING

Store coated metal in a cool, shaded area and cover with light-colored, breathable, waterproof tarpaulins.

 

PRECAUTIONS

TPO Coated Metal that has been exposed to the weather must be prepared with Weathered Membrane Cleaner prior to hot-air welding.

Typical Properties and Characteristics

Sheet Size

4’ x 10’ (1.2m by 3.0 m)

Weight

1.1 lb/ft2 (5.4 kg/m2)

Color

White, Gray & Tan

Flashing Thickness

.035” (0.9 mm) nominal

Steel Thickness

.024” (0.6 mm) nominal (24 ga)

Steel Type

Hot Dipped Galvanized – G90 Conforms to ASTM A653

Packaging

10 or 25 sheets per pallet

Typical properties and characteristics are based on samples tested and are not    guaranteed for all samples of this product. This data and information is intended as a guide and does not reflect the specification or specification range for any particular property of this product.

LEED Information

 

Pre-consumer Recycled Content

0%

Post-consumer Recycled Content

0%

Manufacturing Location

Franklin Park, IL

Solar Reflectance Index (SRI)

N/A

Revised JAN-2014    PDS 09-6320    Page 1 of 2PROTECTION AND SAFETY

 

Product Data Sheet  TPO COATED METAL

Mule-Hide maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain h e a l t h and safety information for your development of appropriate product handling procedures to protect your employees and customers. Mule-Hide's Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using Mule-Hide products in your facilities.

ADDITIONAL INFORMATION

The information given on this PDS is subject to change without notice. Always check the Mule-Hide website at www.mulehide.com for the latest information, changes and updates or contact Mule-Hide Products Company at 800-786-1492.